All the marketing for your new development. In WordPress.
Site plan, unit list, floor plans, axonometric view, enquiries and statistics in one plugin. You keep every unit in one place, and the whole site stays accurate.
| Unit | Rooms | Area | Gross rent | Status |
|---|---|---|---|---|
| N 1.01 | 3.5 | 92 m² | CHF 2,240 | Available |
| N 1.02 | 2.5 | 68 m² | CHF 1,790 | Reserved |
| N 1.03 | 4.5 | 112 m² | CHF 2,690 | Rented |
| N 1.04 | 3.5 | 94 m² | CHF 2,260 | Available |
| S 1.01 | 4.5 | 109 m² | CHF 2,640 | Rented |
| S 1.02 | 2.5 | 66 m² | CHF 1,760 | Available |
| S 1.03 | 3.5 | 91 m² | CHF 2,230 | Reserved |
| S 1.04 | 5.5 | 128 m² | CHF 3,050 | Rented |
The table is kept by hand in the CMS.
Every unit is entered once.
Every reservation means a new PDF price list.
You change the status in the list, and the site updates at once.
A designer draws the clickable areas on the plan.
The plugin calculates them from your plans.
The project tool charges a fee every month.
You pay once per project.
Find every unit in its building.
From the overview to the building to the floor. The axonometric view follows along and shows a unit even where the floor plan hides it. Click a unit to open its details.
Unit S 0.02
- Rooms
- 3.5
- Area
- 88 m²
- Net rent
- CHF 1,960
- Service charges
- CHF 230
- Gross rent
- CHF 2,190
- Status
- Available
With your plans
Upload floor plans and the axonometric view as SVG. Floorstack calculates the clickable area of every unit and suggests how they match.
Without plans
Floorstack draws the site plan from buildings, floors and units. It is ready as soon as the data is in.
Everything prospects compare.
Filter by building and number of rooms, and the status legend filters too. Every unit shows its details with floor plan and brochure, and up to three favourites go into one enquiry.
| Unit | Rooms | Area | Net rent | Gross rent | Status |
|---|---|---|---|---|---|
| North building1st floor | |||||
| N 1.01 | 3.5 | 92 m² | CHF 2,000 | CHF 2,240 | Available |
EnquireBrochure (PDF)Favourite | |||||
| N 1.04 | 3.5 | 94 m² | CHF 2,010 | CHF 2,260 | Available |
| South building1st floor | |||||
| S 1.03 | 3.5 | 91 m² | CHF 1,990 | CHF 2,230 | Reserved |
Just as easy on a phone.
The table turns into cards, the plan stays usable, and every unit can be enquired about. Status never by colour alone, readable without JavaScript.
Cards instead of a table
Below 640 px every row becomes a card, with the same details and the same status.
Plan and axonometric view
The axonometric view sits above the floor plan, and moving between buildings and floors stays compact.
Status not by colour alone
In the default colours every status reaches a contrast above 4.5:1, and the drawn plan adds hatching.
Readable without JavaScript
If the script fails, every unit stays readable with all its details.
Every enquiry arrives complete.
The form knows the selected units. The email goes to you, the confirmation to the prospect, and every enquiry is stored in the backend.
Your enquiry for N 1.01 and S 0.02
Thank you, your enquiry has arrived. We will be in touch.
Spam protection without captcha
Hidden field, time check and at most five enquiries per hour and address.
One place. Everything adds up.
You change the status right in the unit list, without reloading. Site plan, list, axonometric view and statistics follow at once. Upload the Excel file just as you received it.
| Unit | Building | Floor | Rooms | Status |
|---|---|---|---|---|
| N 1.01 | North | 1st | 3.5 | Available ▾ |
| N 1.02 | North | 1st | 2.5 | Reserved ▾ |
| N 1.03 | North | 1st | 4.5 | Rented ▾ |
| S 0.02 | South | Ground | 3.5 | Available ▾ |
| Unit | Field | Previous | New |
|---|---|---|---|
| N 2.04 | Net rent | CHF 2,050 | CHF 1,980 |
| S 3.01 | Status | Reserved | Rented |
| A 0.01 | Unit | new | 4.5 rooms |
Map columns such as "Room size (sqm)" once, and Floorstack keeps the mapping for each project.
You see where the project stands.
Occupancy overall, by building and by number of rooms. Plus the revenue: contracted, lost to vacancy and at full occupancy, each net and gross.
Install
Upload the plugin and activate it with your licence. It works with any theme, and you set the colours in the backend.
Load the units
Upload an Excel file or enter units by hand. Add plans as SVG, and Floorstack calculates the clickable areas.
Place it on the page
One shortcode, and site plan, unit list and enquiry form appear on your page.
34 units in Romanshorn, marketed with Floorstack on huebpark.ch.
You choose how much we take on.
The licence is enough if your web developer builds the site. If you like, we take on the plans and the whole website.
Plan preparation
Architect’s plans become floor plans and an axonometric view with one area per unit.
On requestMore about the serviceWebsite build
The whole marketing website in WordPress, with or without branding.
On requestMore about the serviceOne price per project.
Rented project tools in Switzerland start at CHF 89 a month, and a new development is marketed for one to two years. You pay for Floorstack once, with 12 months of updates and support.
After 12 months Floorstack keeps running, and renewing updates and support is up to you. We quote plans and websites per project.
Frequently asked questions
Does Floorstack work with my theme?
Yes. Floorstack brings its own presentation, and you set the colours and status colours in the backend.
Do I need to buy anything else?
No. Everything Floorstack needs comes with it, including the free version of the ACF plugin (Advanced Custom Fields).
What if I have no plans as SVG?
Then Floorstack draws the plan from the data. You can add architect’s plans later, or we prepare them for you.
Can I run several projects?
Yes, several projects and phases in one installation, each with its own language, currency and statuses. The licence applies per project.
Where do enquiries end up?
As an email to you and stored in the backend of your WordPress, not with a third-party service.
Interested? Write to us.